Our scope of services include, but is not limited to:

CE Marking	Pi Marking	Quality Systems
Machinery	Gas Cylinder	CE Marking
Pressure Vessel	Aerosol Packages	ISO 9000
Simple Pressure Vessel	Safety Valves	CFR (cGMP)
Heat Exchanger	Burst Disks	EN 15085
Autoclave	Material Compliance	DIN 6700
Safety Valves	Material Approvals	EN 17025
Control Valves	Welding Procedure	Certification Bodies
Ball Valves, etc.	Welder Approval	National Authorities
Piping and Piping Systems	Welding Operator	International Authorities
Material Compliance	Technical Compliance File	Notified Bodies
Materials Approvals	Single Unit Approvals
Welding Procedure	Serial Product Approvals
Welder Approval
Welding Operator
Skids & Module
Construction Surveillance
Documentation
Technical Compliance File
Single Unit Approvals
Serial Product Approvals
Acceptance by Notified Bodies with Certification Outcome

 

ATEX

Operating equipment in a Potentially Explosive Environment is a serious consideration for every operator and manufacturer. Many plant owners or operators are required by law or requested by local authorities to review the potential risk and hazard of operating the process equipment within their facilities.

Evaluating the environmental conditions and then reviewing the project applications can be a very complex and time consuming process. When these products are operated in foreign countries or unknown facilities, support from an expert can be extremely helpful, saving time and reducing costs related to the project.

ECE Global, as part of DNV (Notified Body) for pressure equipment certifications, provide detailed Pre-Certification and Certification Services according to the Directive 94/9/EC of March 23, 1994, concerning Equipment and Protective Systems intended for the use in potentially Explosive Atmospheres.

CE Marking and Safety related to the Potential of Explosive Atmospheres Objective of the ATEX Directive 94/9/EC
The objective of directive 94/9/EC is to ensure free movement of the products throughout the EU territory. Therefore the directive, based on Article 95 of the EC Treaty, provides for harmonized requirements and procedures to establish compliance. The directive notes that essential requirements regarding safety and other relevant attributes need to be defined ensuring a high level of protection. These Essential Health and Safety Requirements (EHSRs) are listed in directive 94/9/EC at Annex II.

After June 30th, 2003, only products that comply with directive 94/9/EC (and other relevant legislation) may be placed on the market in the EU territory, freely moved and operated as designed and intended in the expected environment   It should be noted that for the first time directive 94/9/EC provides Essential Health and Safety Requirements for:

• Non-electrical equipment intended for use in potentially explosive atmospheres
• Equipment intended for use in environments which are potentially explosive due to dust hazards and protective systems
• Devices intended for use outside explosive atmospheres which are required for or contribute to the safe functioning of equipment or protective systems with respect to risks of explosion.

This is an increase in scope compared to existing national regulations.

Directive 94/9/EC applies to products placed on the market in the EU whether they are manufactured inside or outside of the EU. For electrical equipment, it is clear that the current Harmonized Standards, as listed in the old explosive atmosphere directives, will be useful as a step towards a demonstration of conformity to directive 94/9/EC before the full set of Harmonized Standards become available. As the standards listed in the old directives are amended, cover a number of the EHSRs (Essential Health and Safety Requirements as specified in the directive 94/9/EC), it may be easier for manufacturers to use these editions and then apply additional measures covering those EHSRs not yet covered by Harmonized Standards. This is the case during the transitional period.

Important Information

It is important to stress that directive 94/9/EC carries obligations for the person who places products on the market and/or puts them into service, be it the manufacturer, his authorized representative, the importer or any other responsible person. The directive does not regulate the use of equipment in a potentially explosive atmosphere, however the use of equipment in potentially explosive atmospheres is regulated through directive 89/655/EEC. In brief, this directive states that products may only be used if conforming to the relevant directives (Article 95 directives) which are applied as appropriate to the product at the time of placing it on the market or putting it into service.

Furthermore, it is intended to regulate the use of products in explosive atmospheres by a “Council directive on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres” which will be an individual directive within the meaning of Article 16 of directive 89/391/EEC and based on Article 138 of the EC Treaty.

In general, the use of such products in potentially explosive areas has to be monitored as part of the surveillance activity undertaken by the competent authorities in the Member States.

Where is CE Marking Required ?

CE-marking compliance is a legal requirement in the European Union member states and the European Economic Area countries. Click here for a map and list of member countries.....